What are the oilseed hulling and kernel husk separation equipment?
In the early stage of oil processing, it is necessary to hull and separate the kernel from husk of the oilseed. Then, what are the equipment for hulling and separating the shells of the oil, and what standard requirements are there after hulllling?
1. Hulling equipment
Sunflower seed huller, disc huller, bar huller, toothed roller huller, combined huller and separator, Chinese sapium seed kernel and hull separator, bar-cage decorticator, centrifugal decorticator, roller type huller, kernel husk separator.
2. Hulling requirements
① Rate of hull in kernel (3.94 mesh/cm sieve test).
Cotton seed kernels should not exceed 10%.
Peanut kernels should not exceed 1%.
Sunflower kernels should not exceed 10%.
② Rate of kernel in hull (hand picking)
Cotton seed husks should not exceed 0.5%.
Peanut husks should not exceed 0.5%.
Sunflower seed husks should not exceed 1% (If there are whole seeds, they will be included after hulling).
1. Hulling equipment
Sunflower seed huller, disc huller, bar huller, toothed roller huller, combined huller and separator, Chinese sapium seed kernel and hull separator, bar-cage decorticator, centrifugal decorticator, roller type huller, kernel husk separator.
2. Hulling requirements
① Rate of hull in kernel (3.94 mesh/cm sieve test).
Cotton seed kernels should not exceed 10%.
Peanut kernels should not exceed 1%.
Sunflower kernels should not exceed 10%.
② Rate of kernel in hull (hand picking)
Cotton seed husks should not exceed 0.5%.
Peanut husks should not exceed 0.5%.
Sunflower seed husks should not exceed 1% (If there are whole seeds, they will be included after hulling).
